Elastomeric Waterproofing Insulating Coating

Insul Flex Elastomeric   is a remarkable new Space Age coating that will insulate, waterproof and reduce sound when applied to exterior wall surfaces.
Insul-Flex is formulated special resins and heat reflecting ceramic microspheres that shield your walls by forming a thick rubber like thermal barrier.

Elastomeric coatings look like regular paint and apply like paint but they are superior to conventional paints due to their very thick elastic dried film which has outstanding adhesion, flexibility, and water sealing characteristics.

Elastomerics are applied at a thickness of about 5 times the normal thickness of regular paint and not only do they bridge hairline cracks, but they also expand and contract with temperature variations helping to prevent future hairline cracks.

While they prevent the penetration of wind driven rain, they also allow moisture vapor within the substrate to escape without blistering or peeling the paint.

Insul Flex   elastomeric wall coating is blended with Insulating Ceramic Microspheres which helps it to insulate and soundproof. The high resin content and mildewcides give you a coating that beautifies, is chalk resistant, offers superior mildew resistance, has very good color retention, and provides a long lasting ceramic surface far superior to conventional paints.

Insul-Flex  is an excellent product for asbestos encapsulation, and reducing excessive heat on the surface of piping, storage tanks and heating and cooling ducts.
Two coat application of 10 mils per coat is equal to 5 coats of ordinary paint.

Recommend Uses and Application:

• An excellent choice for concrete and stucco structures which are prone to cracking such as stucco and wire lath construction, foam board and stucco, concrete block structures, poured in place and pre formed concrete.
• Are you stuck with one of those pre colored stucco homes that is black with Mildew? Insul-Flex can help.
• Mobile Homes and RV's...The continuous rubber like film not only Insulates and Soundproofs but prevents water intrusion due to cracks in seams, prevents screws from backing out, flexes and stretches with temperature changes.
  It's like wrapping your home in a solid rubber blanket.
• Hides flaws...fills minor holes and hairline cracks
• Alkaline resistant and efflorescence resistant
• Breathable coating....allows moisture vapor to escape
• Outstanding Dirt Resistance
• Easy to apply by brush, roller or spray.
• Fast easy cleanup while wet with soap and water, environmentally friendly, long lasting flexible waterproofing protection.

Tip: Use Insul Flex to seal leaky joints in your heating and cooling duct work and to add additional insulation to the surface reducing the heat and cool air loss thru the ductwork.

Apply several coats to your water heater to reduce heat loss.

Coat your Air Conditioning unit outside to keep it running Cooler!

We Provide the "Solutions"
You Just Need to Apply Them!